Get In Touch

Focused on industrial automation equipment spare parts for 20 years

2009-2010 Unit, Chuangxiang Center, 1733 Luling Road, Siming District, Xiamen

HIMA | F3334 | F 3334 4-channel output module

HIMA | F3334 | F 3334 4-channel output module

HIMA | F3334 | F 3334 4-channel output module

Hima Main Serise:

1. CPU: F8650X, F8650E, F8641

2. Power Distribution Module: F7130A, F7130, F7131, F7133

3. Communication MODULE Coprocessor MODULE; F8621A, F8627X, F8628, F8628X

4. Input Module: F3221, F3222, F3223, F3224, F3236, F3237, F6208, F6214, F6215, F6216, F6216A, F6217, F6220, F6221

5. OUTPUT MODULE: F3330, F3331, F3332, F3333, F3334, F3322, F7126, F6705, F1DI1601, F3DIO8/801, F2DO1602, F3DIO20/802, F3AIO8/401, F60GEH01, F60PS01, F60DIO24/1601, F60DI3201, Z7116, Z7126, Z7127, Z7138, Z7128

6. I/O bus link module block: F7553


The remote I/O is equipped with safety-related digital inputs and outputs. The input values on the inputs are safely transmitted to the connected controller via safeethernet. The outputs are safely assigned their values by the connected controller via safeethernet. The state (HIGH, LOW) of each input is signaled by an individual LED. Mechanical contacts without own power supply or signal power source can be connected to the inputs. Potential-free mechanical contacts without own power supply are fed via an internal short-circuit-proof 24 V power source (LS+). Each of them supply a group of 4 mechanical contacts. Figure 1 shows how the connection is performed. With signal voltage sources, the corresponding ground must be connected to the input (L-), see Figure 1. In the default setting, each of the 24V power sources (LS+) provides a current of 40 mA which is buffered against power failures for 20 ms. If higher current is required, the DI Supply[xx] system parameter can be set in the user program to connect an unbuffered power source (1 A) for each terminal pair (33, 34 and 43, 44) and (53, 54 and 63, 64), see Figure 2 and Figure 3. The remote I/O reads back the state of the unbuffered power sources and if an overload occurs, it switches off. The power sources are protected with current limiting components.

About us

Our company is committed to through the installation of control systems for spare parts service for you and drive to provide spare parts support, we have a lot of internal inventory, including (DCS, PLC, CNC), the panel controller and HMI, industrial PC, drive, power supply and production control system and servo motor parts, reduce the maintenance cost of spare parts of you, We’ve also released a lot of new hardware to help support your existing installation or take advantage of the latest technology.

PLCS, DCS, operating panels, servo drives and servo motors, exciter boards

Please enable JavaScript in your browser to complete this form.


There are no reviews yet.

Be the first to review “HIMA | F3334 | F 3334 4-channel output module”

Your email address will not be published. Required fields are marked *